Specifications

Spanning Tree Configuration Command Set
Reviewing and Setting Spanning Tree Bridge Parameters
6-38 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
6.2.1.30 show spantree legacypathcost
Use this command to display the status of the legacy (802.1D) path cost setting.
show spantree legacypathcost
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the status of the legacy path cost setting:
Matrix>show spantree legacypathcost
Legacy path cost is currently enabled.