Specifications

Spanning Tree Configuration Command Set
Reviewing and Setting Spanning Tree Bridge Parameters
6-36 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
6.2.1.28 set spantree autoedge
Use this command to enable or disable the automatic edge port detection function.
set spantree autoedge {disable | enable}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to disable automatic edge port detection:
disable | enable Disables or enables automatic edge port detection.
Matrix>set spantree autoedge disable