Specifications

Spanning Tree Configuration Command Set
Reviewing and Setting Spanning Tree Bridge Parameters
6-22 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
6.2.1.14 set spantree mstcfgid
Use this command to set the MST configuration name and/or revision level.
set spantree mstcfgid {cfgname name | rev level}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set the MST configuration name to mstconfig:
cfgname name Specifies an MST configuration name.
rev level Specifies an MST revision level. Valid values are 1 - 65535.
Matrix>set spantree mstconfigid cfgname mstconfig