Specifications

SNMP Command Set
Basic SNMP Trap Configuration
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 5-71
Example
The example in Figure 5-1 shows how to:
• create an SNMP community called “mgmt”
• configure a trap notification called “TrapSink”.
This trap notification will be sent with the community name “mgmt” to the workstation
192.168.190.80 (which is target address “tr”). It will use security and authorization criteria
contained in a target parameters entry called “v2ExampleParams”.
Figure 5-1 Creating a Basic SNMP Trap Configuration
Create a target address entry. set snmp targetaddr (Section 5.2.6.2)
Matrix>set snmp community mgmt
Matrix>set snmp targetparams v2ExampleParams user mgmt security-model v2
Matrix>set snmp notify 1 tag TrapSink
Matrix>set snmp targetaddr tr param v2ExampleParams ipaddr 192.168.190.80
taglist “TrapSink”
Table 5-13 Basic SNMP Trap Configuration Command Set (Continued)
To do this... Use these commands...