Specifications

SNMP Command Set
Configuring SNMP Notification Parameters
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 5-59
5.2.7.4 show snmp notify
Use this command to display the SNMP notify configuration, which determines which
management targets will receive SNMP notifications.
show snmp notify [notify]
Syntax Description
Command Defaults
If a notify name is not specified, all entries will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the SNMP notify information:
Table 5-12 shows a detailed explanation of the command output.
notify (Optional) Displays notify entries for a specific notify
name.
Matrix>show snmp notify
--- SNMP notifyTable information ---
Notify name = 1
Notify Tag = Console
Notify Type = trap
Storage type = nonVolatile
Row status = active
Notify name = 2
Notify Tag = TrapSink
Notify Type = trap
Storage type = nonVolatile
Row status = active