Specifications

SNMP Command Set
Configuring SNMP Users, Groups and Communities
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 5-27
5.2.2.10 show snmp community
Use this command to display the mapping of SNMPv1and v2 community names to SNMPv3 access
policies.
show snmp community [name]
Syntax Description
Command Defaults
If name is not specified, information will be displayed for all SNMP communities.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display SNMPv3 information about the “public” community name:
name (Optional) Displays SNMP information for a specific
community name.
Matrix>show snmp community public
Community Name: public
Security User Name: initial-restricted
SNMP Engine ID: 80:00:38:18:03:00:01:f4:d2:bc:80
Storage Type: nonvolatile
Row Status: active