Specifications

SNMP Command Set
Disabling / Enabling and Reviewing SNMP Statistics
5-4 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
6. Configuring SNMP target addresses (Section 5.2.6)
7. Configuring SNMP notification parameters (Section 5.2.7)
8. Configuring a basic SNMP trap notification (Section 5.2.8)
5.2 SNMP COMMAND SET
5.2.1 Disabling / Enabling and Reviewing SNMP Statistics
Purpose
To disable, re-enable SNMP and to review SNMP statistics.
Commands
The commands needed to disable or enable SNMP and review SNMP statistics are listed below and
described in the associated section as shown.
• show snmp (Section 5.2.1.1)
• set snmp (Section 5.2.1.2)
• show snmp engineid (Section 5.2.1.3)
• show snmp counters (Section 5.2.1.4)