Specifications

Overview: Link Aggregation
Configuring Port Broadcast Suppression
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 4-77
4.4.9.1 show port broadcast
Use this command to display port broadcast suppression information for one or more ports.
show port broadcast [port-string]
Syntax Description
Command Defaults
If port-string is not specified, broadcast status of all ports will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display broadcast information for Fast Ethernet front panel port 1,
where broadcast suppression is enabled and set to 500 packets per second (pps):
port-string (Optional) Displays broadcast status for specific port(s).
For a detailed description of possible port-string values,
refer to Section 4.1.2.
Matrix>show port broadcast fe.0.1
Broadcast Suppression enabled for port fe.0.1 at 500 pps