Specifications

Overview: Link Aggregation
Configuring Static Port Trunking
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 4-59
4.4.3.3 set trunk
Use this command to create, enable or disable a trunk when the device is set to port trunking mode.
set trunk trunk_name {create | disable | enable}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to create a trunk named “blue”:
trunk_name Specifies the name of the trunk port to be created,
disabled or enabled.
create | disable |
enable
Creates, disables or enables a trunk with the specified
name.
Matrix>set trunk blue create