Specifications

Port Configuration Command Set
Setting Port Traps
4-42 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
4.2.7.1 show port trap
Use this command to display the status of an SNMP link trap on one or more ports.
show port trap [port-string]
Syntax Description
Command Defaults
If port-string is not specified, the trap status for all ports will be displayed.
Command Type
Switch command.
Command Mode
Read-Write.
Examples
This example shows how to display SNMP link trap status for Fast Ethernet front panel ports 1
through 3:
port-string (Optional) Displays trap status for specific port(s). For a
detailed description of possible port-string values, refer to
Section 4.1.2.
Matrix>show port trap fe.0.1-3
Port State
--------- ---------
fe.0.1 enabled
fe.0.2 enabled
fe.0.3 enabled