Specifications

Port Configuration Command Set
Setting Speed and Duplex Mode
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 4-17
4.2.3 Setting Speed and Duplex Mode
Purpose
To set the current operational speed in Mbps and to set the default duplex mode: Half, for half
duplex, or Full, for full duplex.
Commands
The commands needed to set port speed and duplex mode are listed below and described in the
associated section as shown.
• set port speed (Section 4.2.3.1)
• set port duplex (Section 4.2.3.2)
NOTE: These settings only take effect on ports that have auto-negotiation disabled.