Specifications

Port Configuration Command Set
Disabling / Enabling Ports
4-16 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
4.2.2.2 set port enable
Use this command to administratively enable one or more ports.
set port enable port-string
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to enable Fast Ethernet front panel port 3:
port-string Specifies the port(s) to enable. For a detailed description
of possible port-string values, refer to Section 4.1.2.
Matrix>set port enable fe.0.3