Specifications

General Configuration Command Set
Resetting the Device
3-88 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
3.2.8.5 clear config
Use this command to clear the user-defined switch configuration parameters stored in NVRAM.
This resets the device back to its factory default settings, while giving you the option to maintain
the system IP address and SSH (Secure Shell) host keys. For a list of default settings for this device,
refer to Section 3.1.1.
clear config
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to clear the device’s NVRAM configuration parameters without clearing
the IP address or SSH keys:
NOTE: Clear config will not clear user account settings, such as lockout attempts, login
names and passwords, unless executed by a super user (admin).
Matrix>clear config
This command will clear NVRAM.
Do you want to continue (y/n)
[n]? y
Keep the IP setting (y/n)
[n]? y
Keep the SSH host keys (y/n)
[n]? y
Clearing NVRAM..