Specifications

General Configuration Command Set
Configuring CDP
3-78 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
3.2.6.3 set cdp interval
Use this command to set the message interval frequency of the CDP discovery protocol.
set cdp interval frequency
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set the CDP interval frequency to 15 seconds:
frequency Specifies the transmit frequency of CDP messages in
seconds.Valid values are from 5 to 900.
Matrix>set cdp interval 15