Specifications

General Configuration Command Set
Configuring CDP
3-76 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Table 3-6 show cdp Output Details
Output What It Displays...
CDP Version Current CDP version number.
Global CDP State Whether CDP is globally auto-enabled, enabled or disabled.
Global Hold Time Transmit frequency (in seconds) of CDP messages. For
details on using the set cdp interval command to change the
default value of 60, refer to Section 3.2.6.2.
Port Port designation. For a detailed description of possible
port-string values, refer to Section 4.1.2.
State Whether CDP is enabled, disabled or in auto mode on this
port. For details on using the set cdp command to change the
default setting of auto, refer to Section 3.2.6.2.