Specifications

General Configuration Command Set
Configuring CDP
3-74 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
3.2.6.1 show cdp
Use this command to display the status of the CDP discovery protocol and message interval on one
or more ports.
show cdp [port-string]
Syntax Description
Command Defaults
If port-string is not specified, the CDP state for all ports will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
port-string (Optional) Displays CDP information for specific port(s).
For a detailed description of possible port-string values,
refer to Section 4.1.2.