User`s guide

Mirror Port Configuration Screen
3-42 WebView Local Management Tasks
3.26 MIRROR PORT CONFIGURATION SCREEN
When to Use
To enable port mirroring and to set a source and target port for mirroring. The Matrix E1 allows
you to mirror the traffic being switched on a port for the purposes of network traffic analysis and
connection assurance. When port mirroring is enabled, the target port becomes a monitor port for
the source port within the device.
How to Access
Click on Mirror on the WebView navigation frame. The Mirror Port Configuration screen,
Figure 3-25, displays.
Screen Example
Figure 3-25 Mirror Port Configuration Screen
Duplex Status Set the port’s duplex mode. Options are: 10M Half-Duplex, 10M
Full-Duplex, 100M Half-Duplex, 100M Full-Duplex, and
Auto-Negotiation.
Flow Control Status Set the port’s flow control status (Enabled or Disabled). Flow control
is used to manage the transmission between two devices as specified by
IEEE 802.3x to prevent receiving ports from being overwhelmed by
frames from transmitting devices.
Table 3-24 Port Configuration Screen Element Descriptions (Continued)
Use this field… To…