User`s guide

Port Configuration Screen
3-40 WebView Local Management Tasks
3.25 PORT CONFIGURATION SCREEN
When to Use
To set port flow control, administrative, and duplex status.
How to Access
Click on Port on the WebView navigation frame. The Port Information screen, Figure 3-23,
displays. Click on Port Configuration on the content frame. The Port Configuration screen,
Figure 3-24, displays.
Table 3-23 Port Information Screen Element Descriptions
Use this field… To…
Port See the port number associated with the displayed status information.
Admin Status See whether the port is Enabled (up) or Disabled (down).
Link Status See whether the port has a valid link (Up or Down). Link status will be
down until a link is established to an external device and the port is
enabled.
Speed Status See the port’s operational speed in Mbps (10M, 100M or 1000M).
Duplex Status See the port’s duplex mode. Options are: 10M Half-Duplex, 10M
Full-Duplex, 100M Half-Duplex, 100M Full-Duplex, and
Auto-Negotiation.
Flow Control Status See the port’s flow control status (Enabled or Disabled). Flow control
is used to manage the transmission between two devices as specified by
IEEE 802.3x to prevent receiving ports from being overwhelmed by
frames from transmitting devices.