User`s guide

STA Information Screen
WebView Local Management Tasks 3-13
3.10 STA INFORMATION SCREEN
When to Use
To view Spanning Tree Algorithm (STA) information about the device and about each port, and to
access the STA Configuration and STA Port Configuration screens.
VLAN (1-3582) Enter a number (1 to 3582) identifying the VLAN to which the
MAC address belongs.
Port Select a port number associated with the MAC Address and
VLAN.
Status Select a status for new static address entries. Valid options are:
Permanent - Leaves all addresses in the address table, even if
the device is reset.
Delete on Reset - Deletes all new static addresses when the
device is reset.
Delete on Timeout - Deletes all new static addresses when the
device times out.
Add the new static address entry to the address table.
Remove a selected entry from the address table. To select an
entry, click on it in the Address Table field.
Clear all entries in the device’s address table.
Aging Time (10-630) Enter a timeout period (from 10 to 630 seconds) for aging out all
dynamically learned MAC addresses and forwarding
information.
Dynamic Address Counts See the number of dynamic addresses in the device’s address
table.
Static Address Counts See the number of static addresses in the device’s address table.
Static addresses are those created by the user using the CLI or the
fields in this screen.
Table 3-8 Address Table Configuration Screen Element Descriptions (Continued)
Use this field or button… To…