User`s guide

IP Configuration Screen
WebView Local Management Tasks 3-5
Screen Example
Figure 3-3 IP Configuration Screen
Screen Element Descriptions
Refer to Table 3-3 for a functional description of each screen element.
Table 3-3 IP Configuration Screen Element Descriptions
Use this field… To…
IP State Select the host IP state. Options are:
User-Configured - IP functionality is enabled based on the default
or user-specified IP configuration. (This is the default setting.)
BootP Get IP - IP is enabled but will not function until a BOOTP
(Boot Protocol) reply has been received. BOOTP requests will be
periodically broadcast by the device in an effort to learn its IP
address. (BOOTP values include the IP address, default gateway,
and subnet mask.)
IP Address See or enter a new local host IP address.
Subnet Mask See or enter a new local host subnet mask. Default is 255.255.0.0.
Gateway IP Address See or enter a new gateway IP address.
MAC Address See the local host’s MAC address.