User`s guide

IP Configuration Screen
3-4 WebView Local Management Tasks
How to Access
Click on Switch on the WebView navigation frame. The Switch Information screen, Figure 3-2,
displays.
Screen Example
Figure 3-2 Switch Information Screen
Screen Element Descriptions
Refer to Table 3-2 for a functional description of each screen element.
3.4 IP CONFIGURATION SCREEN
When to Use
To configure the host IP state, IP address, subnet mask, gateway IP address, and maximum number
of Telnet sessions allowed, and to view the device’s MAC address.
How to Access
Click on IP on the WebView navigation frame. The IP Configuration screen, Figure 3-3, displays.
Table 3-2 Switch Information Screen Element Descriptions
Use this field… To…
Serial Number See the serial number of the device’s main board.
Number of Ports See the number of ports available on the device.
Hardware Version See the device’s hardware version number.
Firmware Version See the device’s current firmware version number.