Specifications

CLI Tasks, Command Functions and Syntax
WebView (show)
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide A-67
VRRP preempt
mode
Router Enables or disables preempt mode on a VRRP router. Preempt is
enabled on VRRP routers by default, which allows a higher priority
backup router to preempt a lower priority master. For details, refer
to Section 13.1.5.7.
preempt vlan_id vrid
VRRP priority
Router Sets a priority value for a VRRP router. For details, refer to
Section 13.1.5.4.
priority vlan vlan_id vrid priority_value
wait
Switch Pauses the CLI for a specified number of seconds before executing
the next command. For details, refer to Section 3.2.7.1.
wait seconds
WebView (port,
set)
Switch Sets a different TCP port through which to run WebView. For
details, refer to Section 3.1.4.
set webview port webview_port
WebView (set)
Switch Enables or disables WebView. For details, refer to Section 3.1.4.
set webview {enable | disable}
WebView
(show)
Switch Displays WebView status. For details, refer to Section 3.1.4.
show webview
CLI Task Mode Command Function and Syntax