Specifications

CLI Tasks, Command Functions and Syntax
VRRP address
A-66 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
VRRP address
Router Configures a virtual router IP address. For details, refer to
Section 13.1.5.3.
address vlan vlan_id vrid ip_address owner
VRRP advertise
interval
Router Sets the interval in seconds between VRRP advertisements. For
details, refer to Section 13.1.5.5.
advertise-interval vlan vlan_id vrid interval
VRRP
authentication
(MD5)
Router Sets a VRRP MD5 authentication password on an interface. For
details, refer to Section 13.1.5.10.
ip vrrp message-digest-key md5 password
VRRP
authentication
(simple)
Router Sets a VRRP authentication password on an interface. For details,
refer to Section 13.1.5.9.
ip vrrp authentication-key password
VRRP
configuration
mode
Router Enables or disables VRRP configuration mode. For details, refer to
Section 13.1.5.1.
router vrrp
VRRP create
session
Router Creates a VRRP session. For details, refer to Section 13.1.5.2.
create vlan vlan_id vrid
VRRP critical IP
Router Sets a critical IP address for VRRP routing. This defines an
interface — in addition to the interface between hosts and a
first-hop router — that will prevent the master router from
functioning properly if it were to fail. For details, refer to
Section 13.1.5.6.
critical-ip vlan vlan_id vrid ip_address
VRRP enable
Router Enables or disables VRRP on an interface. For details, refer to
Section 13.1.5.8.
enable vlan vlan_id vrid
CLI Task Mode Command Function and Syntax