Specifications

CLI Tasks, Command Functions and Syntax
trunk (show)
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide A-61
time (show)
Switch Displays the current time of day in the system clock. For details,
refer to Section 3.2.2.3.
show time
timeout (set
system)
Switch Sets the time (in minutes) an idle console or Telnet CLI session will
remain connected before timing out. For details, refer to
Section 3.2.2.15.
set system timeout timeout [console | remote]
traceroute
Switch Displays a hop-by-hop path through an IP network from the device
to a specific destination host when operating in switch mode. For
details, refer to Section 11.2.3.20.
traceroute [-w waittime] [-f first-ttl] [-m max-ttl] [-p port] [-q
nqueries] [-s src-addr] [-r] [-d] [-t tos] [-F] [-g gateway] [-I]
[-n] [-v] [-x] host [packetlen]
Router Displays a hop-by-hop path through an IP network from the device
to a specific destination host when operating in router mode. For
details, refer to Section 12.2.5.9.
traceroute host
traffic (show IP)
Router Displays general IP traffic statistics. For details, refer to
Section 12.2.5.3.
show ip traffic [softpath]
trunk (clear)
Switch Deletes a trunk from the switch. For details, refer to Section 4.4.3.4.
clear trunk [trunk_name]
trunk (set)
Switch Creates, enables or disables trunks on the switch. For details, refer
to Section 4.4.3.3.
set trunk trunk_name {create | disable | enable}
trunk (show)
Switch Displays trunking information for the switch. For details, refer to
Section .
show trunk [trunk_name]
CLI Task Mode Command Function and Syntax