Specifications

CLI Tasks, Command Functions and Syntax
system location (set)
A-60 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
system location
(set)
Switch Sets a location for the system. For details, refer to Section 3.2.2.11.
set system location [“location_string”]
system name
(set)
Switch Sets a name for the system. For details, refer to Section 3.2.2.10.
set system name [“name_string”]
system
resources
(show)
Switch Displays the CPU type, NVRAM installed and other resources
installed in the system. For details, refer to Section 3.2.2.1.
show system resources
Telnet (set)
Switch Enables or disables Telnet on the device when operating in switch
mode. For details, refer to Section 3.2.4.2.
set telnet {[disable | enable] inbound | outbound | all} | port
port | session {inbound | outbound | ssh}session}
Telnet (show)
Switch Displays the status of Telnet on the device when operating in switch
mode. For details, refer to Section 3.2.4.1.
show telnet
terminal (set)
Switch Sets the number of columns and rows for the display terminal
connected to the device’s console port. This information is used to
control the output of the CLI itself. For details, refer to
Section 3.2.2.14.
set terminal {rows num-rows [disable] | cols num-cols} [static]
terminal (show)
Switch Displays the number of columns and rows for the terminal
connected to the device’s console. For details, refer to
Section 3.2.2.13.
show terminal
time (set)
Switch Changes the time of day on the system clock. For details, refer to
Section 3.2.2.4.
set time [day_of_week][mm/dd/yyyy][hh:mm:ss]
CLI Task Mode Command Function and Syntax