Specifications

CLI Tasks, Command Functions and Syntax
system contact (set)
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide A-59
SSH log in
grace time (set)
Switch Sets the time interval for an SSH client to authenticate. For details,
refer to Section 14.3.6.11.
set ssh logingracetime value
SSH MAC
(clear)
Switch Clears one or more MAC algorithms supported by SSH. For details,
refer to Section 14.3.6.8.
clear ssh mac {all | mac_name}
SSH MAC (set)
Switch Sets the MAC algorithms supported by SSH. These algorithms
provide integrity checking. For details, refer to Section 14.3.6.7.
set ssh mac {all | anymac | anystdmac | mac_name}
SSH password
guesses (set)
Switch Sets the number of SSH authentication attempts allowed before
access is denied. For details, refer to Section 14.3.6.10.
set ssh passwordguesses value
SSH port (set)
Switch Sets the SSH listening port. For details, refer to Section 14.3.6.6.
set ssh port port_num
SSH rekey
interval (set)
Switch Sets the number of seconds between SSH key exchanges. For
details, refer to Section 14.3.6.9.
set ssh rekeyintervalseconds value
SSH server
Switch Configures a connection to an SSH server. For details, refer to
Section 14.3.6.3.
ssh ipaddr login [port]
system (show)
Switch Displays system information, including operating status, baud rate,
uptime, system name, location and contact name. For details, refer
to Section 3.2.2.2.
show system
system contact
(set)
Switch Sets a contact person for the system. For details, refer to
Section 3.2.2.12.
set system contact [“contact_string”]
CLI Task Mode Command Function and Syntax