Specifications

CLI Tasks, Command Functions and Syntax
Spanning Tree version (set)
A-58 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Spanning Tree
version (set)
Switch Sets the version of the Spanning Tree protocol to RSTP (Rapid
Spanning Tree Protocol), MSTP (Multiple Spanning Tree Protocol)
or to STP 802.1D-compatible. For details, refer to Section 6.2.1.4.
set spantree version {rstp | mstp | stpcompatible}
Spanning Tree
version (show)
Switch Displays the current version of the Spanning Tree protocol running
on the device. For details, refer to Section 6.2.1.3.
show spantree version
speed (set port)
Switch Sets the default speed of an Ethernet port interface in Mbps. For
details, refer to Section 4.2.3.1.
set port speed port-string {10 | 100 | 1000}
SSH (set)
Switch Enables or disables Secure Shell (SSH) access. For details, refer to
Section 14.3.6.2.
set ssh {enable | disable}
SSH (show)
Switch Displays the current status and configuration of SSH on the device.
For details, refer to Section 14.3.6.1.
show ssh [ciphers] [config admin | oper] [mac] [sessions]
SSH ciphers
(clear)
Switch Clears one or more cipher names used for SSH encryption. For
details, refer to Section 14.3.6.5.
clear ssh ciphers {all | ciphername}
SSH ciphers
(set)
Switch Sets the cipher name(s) used for SSH encryption. For details, refer
to Section 14.3.6.4.
set ssh ciphers {all | anycipher | anystdcipher | ciphername}
SSH config
(clear)
Switch Resets the SSH configuration to default settings. For details, refer
to Section 14.3.6.13.
clear ssh config
SSH keys
(clear)
Switch Regenerates new SSH authentication keys. For details, refer to
Section 14.3.6.12.
clear ssh keys
CLI Task Mode Command Function and Syntax