Specifications

CLI Tasks, Command Functions and Syntax
Spanning Tree version (clear)
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide A-57
Spanning Tree
span guard
timeout (set)
Switch Sets the amount of time (in seconds) an edge port will remain
locked by the span guard function. For details, refer to
Section 6.2.2.18.
set spantree spanguardtimeout timeout
Spanning Tree
span guard
timeout (show)
Switch Displays the Spanning Tree secures span timeout setting. For
details, refer to Section 6.2.2.17.
show spantree spanguardtimeout
Spanning Tree
transmit hold
count (set)
Switch Sets the maximum transmit hold count on a Spanning Tree. This is
the number of BPDUs which will be transmitted before
transmissions are subject to a one-second timer. For details, refer
to Section 6.2.1.37.
set spantree txholdcount txholdcount
Spanning Tree
transmit hold
count (show)
Switch Displays the maximum BPDU transmission rate. For details, refer
to Section 6.2.1.36.
show spantree txholdcount
Spanning Tree
topology
change trap
suppress (set)
Switch Disables or enables topology change trap suppression on Rapid
Spanning Tree edge ports. When enabled, this prevents edge ports
from sending topology change traps. For details, refer to
Section 6.2.1.34.
set spantree tctrapsuppress {disable | enable}
Spanning Tree
topology
change trap
suppress
(show)
Switch Displays the status of topology change trap suppression on Rapid
Spanning Tree edge ports. For details, refer to Section 6.2.1.33.
show spantree tctrapsuppress
Spanning Tree
version (clear)
Switch Resets the Spanning Tree version to MSTP mode. For details, refer
to Section 6.2.1.5.
clear spantree version
CLI Task Mode Command Function and Syntax