Specifications

CLI Tasks, Command Functions and Syntax
Spanning Tree priority (clear)
A-56 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Spanning Tree
priority (clear)
Switch Resets the bridge priority to the default value of 32768. For details,
refer to Section 6.2.1.17.
clear spantree priority [sid]
Spanning Tree
priority (set)
Switch Sets the device’s Spanning Tree priority. The lower the numeric
value, the higher the device priority. For details, refer to
Section 6.2.1.16.
set spantree priority bridge_priority [sid]
Spanning Tree
span guard
(clear)
Switch Resets the status of the Spanning Tree span guard function to
disabled. For details, refer to Section 6.2.2.16.
clear spantree spanguard
Spanning Tree
span guard (set)
Switch Enables or disables the Spanning Tree span guard function. When
enabled, this prevents an unauthorized bridge from becoming part
of the active Spanning Tree topology. For details, refer to
Section 6.2.2.15.
set spantree spanguard {enable | disable}
Spanning Tree
span guard
(show)
Switch Displays the status of the Spanning Tree span guard function. For
details, refer to Section 6.2.2.17.
show spantree spanguard
Spanning Tree
span guard lock
(clear)
Switch Unlocks one or more ports locked by the Spanning Tree span guard
function. For details, refer to Section 6.2.2.21.
clear spantree spanguardlock [port-string]
Spanning Tree
span guard lock
(show)
Switch Displays the status of the Spanning Tree span guard function on one
or more ports. For details, refer to Section 6.2.2.20.
show spantree spanguardlock port-string
Spanning Tree
span guard
timeout (clear)
Switch Resets the Spanning Tree span guard timeout to the default value of
300 seconds. For details, refer to Section 6.2.2.19.
clear spantree spanguardtimeout
CLI Task Mode Command Function and Syntax