Specifications

CLI Tasks, Command Functions and Syntax
Spanning Tree MST config (show)
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide A-53
Spanning Tree
maximum aging
time (clear)
Switch Resets the bridge maximum aging time for a Spanning Tree to a
default value of 20 seconds. For details, refer to Section 6.2.1.24.
clear spantree maxage
Spanning Tree
maximum aging
time (set)
Switch Sets the Spanning Tree maximum aging time. This is the maximum
time (in seconds) the device can wait without receiving a
configuration message (bridge “hello”) before attempting to
reconfigure. For details, refer to Section 6.2.1.23.
set spantree maxage agingtime
Spanning Tree
MST (clear)
Switch Deletes a Multiple Spanning Tree instance. For details, refer to
Section 6.2.1.8.
clear spantree msti [sid]
Spanning Tree
MST (set)
Switch Creates or deletes a Multiple Spanning Tree instance. For details,
refer to Section 6.2.1.7.
set spantree msti sid {create | delete}
Spanning Tree
MST (show)
Switch Displays a list of the configured Multiple Spanning Tree instances.
For details, refer to Section 6.2.1.6.
show spantree mstilist
Spanning Tree
MST config
(clear)
Switch Resets the Multiple Spanning Tree revision level to a default value
of 0 and the configuration name to a default string representing the
bridge MAC address. For details, refer to Section 6.2.1.15.
clear spantree mstcfgid
Spanning Tree
MST config (set)
Switch Sets the Multiple Spanning Tree configuration name and/or revision
level. For details, refer to Section 6.2.1.14.
set spantree mstcfgid {cfgname name | rev level}
Spanning Tree
MST config
(show)
Switch Displays the Multiple Spanning Tree configuration identifier
elements, including format selector, configuration name, revision
level, and configuration digest. For details, refer to
Section 6.2.1.13.
show spantree mstcfgid
CLI Task Mode Command Function and Syntax