Specifications

CLI Tasks, Command Functions and Syntax
Spanning Tree hello (set)
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide A-51
Spanning Tree
edge port
(show)
Switch Displays the edge port administrative status for a Spanning Tree
port. For details, refer to Section 6.2.2.11.
show spantree adminedge port-string
Spanning Tree
edge detection
(clear)
Switch Resets automatic edge port detection to the default value to enabled.
For details, refer to Section 6.2.1.29.
clear spantree autoedge
Spanning Tree
edge port
detection (set)
Switch Enables or disables automatic edge port detection. For details, refer
to Section 6.2.1.28.
set spantree autoedge {disable | enable}
Spanning Tree
edge port
detection
(show)
Switch Displays the status of automatic edge port detection. For details,
refer to Section 6.2.1.27.
show spantree autoedge
Spanning Tree
forward delay
(clear)
Switch Resets the bridge forward delay to a default setting of 15 seconds.
For details, refer to Section 6.2.1.26.
clear spantree fwddelay
Spanning Tree
forward delay
(set)
Switch Sets the Spanning Tree forward delay. This is the maximum time
(in seconds) the root device will wait before changing states (i.e.,
listening to learning to forwarding). For details, refer to
Section 6.2.1.25.
set spantree fwddelay delay
Spanning Tree
hello (clear)
Switch Resets the bridge hello time for a Spanning Tree to a default value
of 2 seconds. For details, refer to Section 6.2.1.22.
clear spantree hello [port-string]
Spanning Tree
hello (set)
Switch Sets the bridge hello time for a Spanning Tree. This is the time
interval (in seconds) at which the root device transmits a
configuration message. For details, refer to Section 6.2.1.21.
set spantree hello interval [port-string]
CLI Task Mode Command Function and Syntax