Specifications

CLI Tasks, Command Functions and Syntax
SNTP server (clear)
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide A-49
SNMP user (set)
Switch Creates a new SNMPv3 user. For details, refer to Section 5.2.2.2.
set snmp user user [authentication md5 [privacy]] [remote
remoteid] [volatile | nonvolatile]
SNMP user
(show)
Switch Displays a summary of the SNMPv3 user configuration. For
details, refer to Section 5.2.2.4.
show snmp user [user remote remote]]
SNMP view
(clear)
Switch Deletes an SNMP MIB view. For details, refer to Section 5.2.4.3.
clear snmp view viewname subtree subtree
SNMP view (set)
Switch Sets the SNMP MIB view configuration. For details, refer to
Section 5.2.4.2.
set snmp view viewname subtree subtree [included | excluded]
[volatile | nonvolatile]
SNMP view
(show)
Switch Displays the SNMP MIB view configuration (for VACM). For
details, refer to Section 5.2.4.1.
show snmp view [viewname subtree oid]]
SNTP broadcast
delay (set)
Switch Sets the SNTP time to wait for a response from an SNTP server, in
milliseconds, when in broadcast mode. For details, refer to
Section 11.2.4.3.
set sntp broadcastdelay time
SNTP client
(set)
Switch Sets the SNTP operation mode. For details, refer to
Section 11.2.4.2.
set sntp client {broadcast | unicast | disable}
SNTP poll
interval (set)
Switch Sets the SNTP poll interval in seconds. This is the time between
SNTP requests. For details, refer to Section 11.2.4.4.
set sntp poll-interval time
SNTP server
(clear)
Switch Removes one or all servers from the SNTP server list. For details,
refer to Section 11.2.4.6.
clear sntp server {all [ip-address | hostname]}
CLI Task Mode Command Function and Syntax