Specifications

CLI Tasks, Command Functions and Syntax
SNMP (set)
A-44 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
SNMP (set)
Switch Enables or disables SNMP management. For details, refer to
Section 5.2.1.2.
set snmp {enable | disable}
SNMP (show)
Switch Displays the status of SNMP management. For details, refer to
Section 5.2.1.1.
show snmp
SNMP access
(clear)
Switch Clears the SNMP access entry of a specific group, including its set
SNMP security-model, and level of security. For details, refer to
Section 5.2.3.3.
clear snmp access groupname security-model {v1 | v2 | v3
{noauth | auth | authpriv}}
SNMP access
(set)
Switch Sets an SNMP access configuration. For details, refer to
Section 5.2.3.2.
set snmp access groupname security-model {v1 | v2 | v3
{noauth | auth | authpriv}} [read read] [write write] [notify
notify] [volatile | nonvolatile]
SNMP access
(show)
Switch Displays the SNMP access security information associated with a
specific group. For details, refer to Section 5.2.3.1.
show snmp access [groupname] [security-model {v1 | v2 | v3
{noauth | auth | authpriv}}
SNMP
authentication
trap (set)
Switch Enables or disables the sending of SNMP authentication failure
traps. For details, refer to Section 5.2.3.5.
set snmp authenticationtrap {enable | disable}
SNMP
authentication
trap (show)
Switch Displays the status of the SNMP authentication trap function. For
details, refer to Section 5.2.3.4.
show snmp authenticationtrap
SNMPv1 / v2
community
(clear)
Switch Deletes an SNMPv1 or v2 community name. For details, refer to
Section 5.2.2.9.
clear community community_name
CLI Task Mode Command Function and Syntax