Specifications

CLI Tasks, Command Functions and Syntax
screen (clear)
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide A-43
RIP send
version
Router Sets the RIP version for update packets transmitted on an interface.
For details, refer to Section 13.1.1.7.
ip rip send version {1 | 2 | r1compatible}
RIP split
horizon
Router Enables or disables split horizon mode for RIP packets. Split
horizon prevents packets from exiting through the same interface on
which they were received. For details, refer to Section 13.1.1.18.
ip split-horizon [poison]
RIP timers
Router Adjusts RIP routing timers. For details, refer to Section 13.1.1.6.
timers basic update_seconds invalid_seconds
holdown_seconds flush_seconds
RIP triggered
updates
(disable)
Router Prevents RIP from sending triggered updates. For details, refer to
Section 13.1.1.17.
ip rip disable-triggered-updates
RMON stats
(show)
Switch Displays RMON (Remote Monitoring) statistics for one or more
ports. For details, refer to Section 11.2.2.8.
show rmon stats [port-string]
router (enable)
Router Enables router mode (Privileged EXEC) from switch mode. For
more details, refer to Section 3.3.3.
router
router ID (set)
Router Sets the IP address that will be used as the OSPF router ID. For
details, refer to Section 13.1.2.3.
router id ip_address
routing
(disable)
Router Disables IP routing on the device and removes the routing
configuration. For details, refer to Section 12.2.2.3.
no ip routing
screen (clear)
Switch Clears the screen for the current CLI session. For details, refer to
Section 3.2.7.2.
cls
CLI Task Mode Command Function and Syntax