Specifications

CLI Tasks, Command Functions and Syntax
RIP distance
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide A-41
RIP
authentication
key chain
(create)
Router Creates or deletes a key chain used for RIP authentication on an
interface. For details, refer to Section 13.1.1.9.
key chain name
RIP
authentication
key chain
(enable)
Router Enables or disables a RIP authentication key chain for use on an
interface. For details, refer to Section 13.1.1.14.
ip rip authentication keychain name
RIP
authentication
key string
(create)
Router Specifies an authentication string for a key. Once configured, this
string must be sent and received in RIP packets in order for them to
be authenticated. For details, refer to Section 13.1.1.11.
key-string text
RIP
authentication
mode
Router Sets the RIP authentication mode when an authentication key chain
is present. For details, refer to Section 13.1.1.15.
ip rip authentication mode {text | md5}
RIP
authentication
send lifetime
Router Specifies the time period during which a RIP authentication key on
a key chain is valid to be sent. For details, refer to Section 13.1.1.13.
send-lifetime start-time month date year {duration seconds |
end-time | infinite}
RIP automatic
route
summarization
(disable)
Router Disables automatic route summarization. This enables CIDR,
allowing RIP to advertise all subnets and host routing information
on the device. For details, refer to Section 13.1.1.16.
no auto-summary
RIP
configuration
mode
Router Enables or disables RIP router configuration mode. For details,
refer to Section 13.1.1.1.
router rip
RIP distance
Router Sets an administrative distance for RIP routes. For details, refer to
Section 13.1.1.4.
distance weight
CLI Task Mode Command Function and Syntax