Specifications

CLI Tasks, Command Functions and Syntax
port web authentication port control
A-36 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
port web
authentication
port control
Switch Sets the port web authentication port control mode. For details, refer
to Section 14.3.5.16.
set pwa portcontrol {auto | forceauthorized |
forceunauthorized | promiscuousauto} [port-string]
port web
authentication
protocol
Switch Sets the port web authentication protocol. For details, refer to
Section 14.3.5.8.
set pwa protocol {chap | pap}
port web
authentication
quiet period
Switch Sets the amount of time a port will be in the held state after a user
unsuccessfully attempts to log on. For details, refer to
Section 14.3.5.14.
set pwa quietperiod time [port-string]
port web
authentication
refresh time
Switch Sets the port web authentication refresh time. For details, refer to
Section 14.3.5.5.
set pwa refreshtime time
priority
classification
(clear)
Switch Clears priority classification entries. For details, refer to
Section 9.3.4.4.
clear priority classification priority_value data_meaning
data_value [data_mask]
priority
classification
(set)
Switch Creates a rule that will assign untagged traffic to a priority based on
Layer 2/3/4/ rules. For details, refer to Section 9.3.4.2.
set priority classification priority_value data_meaning
data_value [data_mask] {create | disable | enable}
priority
classification
(show)
Switch Displays priority classification information. For details, refer to
Section 9.3.4.1.
show priority classification
priority
classification
ingress (clear)
Switch Removes ports from a priority classification rule. For details, refer
to Section 9.3.5.2.
clear priority classification ingress priority_value port-string
data_meaning data_value [data_mask]
CLI Task Mode Command Function and Syntax