Specifications

CLI Tasks, Command Functions and Syntax
OSPF border routers (show)
A-28 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
OSPF border
routers (show)
Router Displays information about OSPF internal entries to ABRs (Area
Border Routers) and ASBRs (Autonomous System Border
Routers). For details, refer to Section 13.1.2.25.
show ip ospf border-routers
OSPF
configuration
mode
Router Enables or disables OSPF router configuration mode. For details,
refer to Section 13.1.2.1.
router ospf process_id
OSPF cost
Router Sets the cost of sending an OSPF packet on an interface. For details,
refer to, Section 13.1.2.4.
ip ospf cost cost
OSPF database
(show)
Router Displays the OSPF link state database. For details, refer to
Section 13.1.2.24.
show ip ospf database [link-state-id]
OSPF database
overflow
Router Limits the size of OSPF link state database overflow, a condition
where the router is unable to maintain the database in its entirety.
For details, refer to Section 13.1.2.22.
database-overflow external {[exit-overflow-interval interval]
[limit limit] [warning-level level]}
OSPF dead
interval
Router Sets the number of seconds a router must wait to receive a hello
packet from its neighbor before determining that the neighbor is out
of service. For details, refer to Section 13.1.2.10.
ip ospf dead-interval seconds
OSPF distance
Router Sets an administrative distance for OSPF routes. For details, refer to
Section 13.1.2.13.
distance ospf {external | inter-area | intra-area} weight
OSPF hello
interval
Router Sets the number of seconds a router must wait before sending a
hello packet to neighbor routers on an interface. For details, refer to
Section 13.1.2.9.
ip ospf hello-interval seconds
CLI Task Mode Command Function and Syntax