Specifications

CLI Tasks, Command Functions and Syntax
MAC locking static (set)
A-26 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
MAC locking
static (set)
Switch Restricts MAC locking on a port to a maximum number of static
(management defined) MAC addresses for end stations connected
to that port. For details, refer to Section 14.3.4.7.
set maclock static port-string value
MAC locking
stations (show)
Switch Displays MAC locking information about end stations connected to
the device. For details, refer to Section 14.3.4.2.
show maclock stations [port-string] [firstarrival | firstarrival
port-string] [static | static port-string]
MAC locking
trap (set)
Switch Enables or disables MAC lock trap messaging. For details, refer to
Section 14.3.4.10.
set maclock trap port-string {enable | disable}
mirroring (clear
port)
Switch Clears a mirroring association between ports. For details, refer to
Section 4.3.1.3.
clear port mirroring source_port
mirroring (set
port)
Switch Enables, disables or configures mirroring between ports. For
details, refer to Section 4.3.1.2.
set port mirroring {disable | enable | source_port target_port}
mirroring (show
port)
Switch Displays the source and target ports for mirroring, and whether
mirroring is currently enabled or disabled for those ports. For
details, refer to Section 4.3.1.1.
show port mirroring
multicast (show
routes)
Router Displays information about IP multicast routes. For details, refer to
Section 13.1.3.4.
show ip mroute
negotiation (set
port)
Switch Enables or disables auto-negotiation on one or more ports. For
details, refer to Section 4.2.5.2.
set port negotiation port-string {enable | disable}
CLI Task Mode Command Function and Syntax