Specifications

CLI Tasks, Command Functions and Syntax
MAC locking static (clear)
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide A-25
MAC locking
(clear)
Switch Clears MAC locking from one or more static MAC addresses. For
details, refer to Section 14.3.4.11.
clear maclock mac_address port-string
MAC locking
(set)
Switch Creates a static MAC address and enables or disables MAC locking
for the specific MAC address and port. When created and enabled,
this allows only the end station designated by the MAC address to
participate in frame relay. For details, refer to Section 14.3.4.5.
set maclock mac_address port-string {create | enable |
disable}
MAC locking
(disable)
Switch Disables MAC locking on one or more ports. For details, refer to
Section 14.3.4.4.
set maclock disable [port-string]
MAC locking
(enable)
Switch Enables MAC locking on one or more ports. For details, refer to
Section 14.3.4.3.
set maclock enable [port-string]
MAC locking
(show)
Switch Displays the status of MAC locking globally or on one or more
ports. For details, refer to Section 14.3.4.1.
show maclock [port-string]
MAC locking
first arrival
(move)
Switch Moves all current first arrival MACs to static entries. For details,
refer to Section 14.3.4.8.
set maclock move port-string
MAC locking
first arrival (set)
Switch Restricts MAC locking on a port to a maximum number of end
station addresses first connected to that port. For details, refer to
Section 14.3.4.6.
set maclock firstarrival port-string value
MAC locking
static (clear)
Switch Removes statically locked MACs from a port. For details, refer to
Section 14.3.4.9.
clear maclock static port-string
CLI Task Mode Command Function and Syntax