Specifications

CLI Tasks, Command Functions and Syntax
MAC authentication port (enable)
A-24 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
MAC
authentication
port (enable)
Switch Enables or disables one or more ports for MAC authentication. For
details, refer to Section 14.3.3.5.
set macauthentication port {enable | disable} [port-string]
MAC
authentication
port initialize
Switch Forces one or more MAC authentication ports to initialize and
removes any currently active sessions on those ports. For details,
refer to Section 14.3.3.6.
set macauthentication portinitialize [port-string]
MAC
authentication
port
reauthenticate
Switch Forces an immediate reauthentication of the currently active
sessions on one or more MAC authentication ports. For details, refer
to Section 14.3.3.9.
set macauthentication portreauthenticate [port-string]
MAC
authentication
quiet period
Switch Sets the time (in seconds) following a failed MAC authentication
before another can be attempted through a port. For details, refer to
Section 14.3.3.12.
set macauthentication quietperiod value [port-string]
MAC
authentication
reauthentica-
tion (enable)
Switch Enables or disables reauthentication of all currently authenticated
MAC addresses on one or more ports. For details, refer to
Section 14.3.3.8.
set macauthentication reauthentication {enable | disable}
[port-string]
MAC
authentication
reauthentica-
tion period
Switch Sets the MAC reauthentication period (in seconds). This is the time
lapse between attempts to re-authenticate any current MAC address
authenticated to a port. For details, refer to Section 14.3.3.11.
set macauthentication reauthperiod seconds [port-string]
MAC
authentication
session (show)
Switch Displays the active MAC authenticated sessions on the device. For
details, refer to Section 14.3.3.2.
show macauthentication session [port-string]
CLI Task Mode Command Function and Syntax