Specifications

CLI Tasks, Command Functions and Syntax
MAC authentication password (set)
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide A-23
MAC aging time
(set)
Switch Sets the time in seconds to age out inactive MAC address entries.
For details, refer to Section 11.2.3.10.
set mac agingtime seconds
MAC aging time
(show)
Switch Displays the current MAC aging time setting. For details, refer to
Section 11.2.3.9.
show mac agingtime
MAC algorithm
(set)
Switch Sets the MAC algorithm mode, which determines the hash
mechanism used by the device when performing layer 2 lookups on
received frames. Each algorithm is optimized for a different spread
of MAC addresses. For details, refer to Section 11.2.3.12.
set mac algorithm {mac-random | mac-sequential |
mac-vid-random | mac-vid-sequential}
MAC
authentication
(set)
Switch Globally enables or disables MAC authentication. For details, refer
to Section 14.3.3.3.
set macauthentication {enable | disable}
MAC
authentication
(show)
Switch Displays MAC authentication information for one or more ports.
For details, refer to Section 14.3.3.1.
show macauthentication [port-string]
MAC
authentication
initialize
Switch Forces a current MAC authentication session to re-initialize and
removes the session. For details, refer to Section 14.3.3.7.
set macauthentication macinitialize mac_addr
MAC
authentication
reauthenticate
Switch Forces an immediate reauthentication of the specified MAC
address. For details, refer to Section 14.3.3.10.
set macauthentication macreauthenticate mac_addr
MAC
authentication
password (set)
Switch Sets a MAC authentication password. For details, refer to
Section 14.3.3.4.
set macauthentication password password
CLI Task Mode Command Function and Syntax