Specifications

CLI Tasks, Command Functions and Syntax
logging server (set)
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide A-21
logging audit
trail (show)
Switch Displays the contents of a logging file. For details, refer to
Section 11.2.1.14.
show logging audit-trail [file]
logging console
(set)
Switch Set sthe severity level at which Syslog messages will display to the
console, or prevents Syslog messages from displaying to the
console. For details, refer to Section 11.2.1.4.
set logging console {severity | disable}
logging console
(show)
Switch Shows the state of global logging and the severity level at which
logging messages will display to the console port. For details, refer
to Section 11.2.1.3.
show logging console
logging defaults
(clear)
Switch Resets logging default values. For details, refer to
Section 11.2.1.10.
clear logging default [facility] [severity] [port]
logging defaults
(set)
Switch Sets logging default values. For details, refer to Section 11.2.1.9.
set logging default [facility facility] [severity severity] [port
port]
logging defaults
(show)
Switch Displays the Syslog server default values. For details, refer to
Section 11.2.1.8.
show logging default
logging server
(clear)
Switch Removes a server from the Syslog server table. For details, refer to
Section 11.2.1.7.
clear logging server index
logging server
(set)
Switch Configures a Syslog server. For details, refer to Section 11.2.1.6.
set logging server index [ip_addr ip_addr] [facility facility]
[severity severity] [descr descr] [port port] [state {enable |
disable}]
CLI Task Mode Command Function and Syntax