Specifications

CLI Tasks, Command Functions and Syntax
lockout time (set system)
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide A-19
link aggregation
(add port)
Switch Adds one or more underlying physical ports to a link aggregation
group (LAG). For details, refer to Section 4.4.8.2.
set lacp static lagportstring port-string
link aggregation
(clear static
ports)
Switch Removes specific ports from a link aggregation group (LAG). For
details, refer to Section 4.4.8.3.
clear lacp static lagportstring port-string
link aggregation
(disable/enable)
Switch Disables or enables link aggregation on the device. For details, refer
to Section 4.4.8.1.
set lacp {disable | enable}
link aggregation
(set port)
Switch Configures link aggregation parameters for one or more ports. For
details, refer to Section 4.4.8.5.
set port lacp {[aadminstate state] [padminkey port-string
{value | default}] [enable | disable] port-string}
link aggregation
(show port)
Switch Displays link aggregation information for one or more ports. For
details, refer to Section 4.4.8.4.
show port lacp {[port-string] [counters port-string] [detail
port-string]}
lockout
attempts (set
system)
Switch Disables system lock out or sets the number of failed login attempts
before user lock out occurs. When the number of attempts is
reached, Read-Write and Read-Only user accounts will be disabled,
and the admin account will be locked out for the number of minutes
specified by the set system lockout command. For details, refer to
Section 3.2.1.8.
set system lockout attempts {attempts | disable}
lockout time
(set system)
Switch Sets the number of minutes the admin user account will be locked
out after the maximum number of failed attempts to log on to the
switch. For details, refer to Section 3.2.2.16.
set system lockout time
CLI Task Mode Command Function and Syntax