Specifications

CLI Tasks, Command Functions and Syntax
IGMP VLAN mode (set ports)
A-16 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
IGMP VLAN
mode (set
ports)
Switch Sets IGMP VLAN Registration (IVR) ports as open or secure. Open
ports will scope multicast transmissions to the IGMP VLAN. For
details, refer to Section 10.2.4.4.
set igmp mode port-string {open | secure}
IGMP VLAN
mode (set
VLAN)
Switch Sets the VLAN registered to forward IGMP multicast traffic to all
subscribing, or “open” ports. For details, refer to Section 10.2.4.2.
set igmp mode vlan vlan_id
IGMP VLAN
mode (show)
Switch Displays IGMP VLAN Registration (IVR) information for one or
more ports. For details, refer to Section 10.2.4.1.
show igmp mode [port-string]
interfaces
(show)
Router Displays information about all interfaces (VLANs) configured on
the router. For details, refer to Section 12.2.1.1.
show interface [vlan vlan-id | loopback loopback-id]
interface
configuration
mode
Router Enables interface configuration mode from global configuration
mode. For details, refer to Section 12.2.1.2.
interface {vlan vlan_id | loopback loopback-id}
IP address (set)
Switch Sets the system IP address, subnet mask and default gateway. For
details, refer to Section 3.2.2.18.
set ip address ip_address [mask ip_mask] [gateway
ip_gateway]
Router Sets, removes, or disables a primary or secondary IP address for an
interface. For details, refer to Section 12.2.1.4.
ip address ip_address ip_mask
IP address
(show)
Switch Displays the system IP address, system mask and default gateway.
For details, refer to Section 3.2.2.17.
show ip address
CLI Task Mode Command Function and Syntax