Specifications

CLI Tasks, Command Functions and Syntax
event log (clear)
A-12 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
event log (clear)
Switch Deletes all entries from the system event log. For details, refer to
Section 11.2.2.2.
clear eventlog
event log
(show)
Switch Displays the system event log. For details, refer to Section 11.2.2.1.
show eventlog
exit
Switch Exits a CLI session. For details, refer to Section 3.2.7.3.
exit
flow age time
(clear)
Switch Resets the number of seconds flow control entries will remain
active. For details, refer to Section 4.2.6.7.
clear flow agetime
flow age time
(set)
Switch Sets the number of seconds flow control entries will remain active.
For details, refer to Section 4.2.6.6.
set flow agetime time
flow age time
(show)
Switch Displays the flow control age time setting. For details, refer to
Section 4.2.6.5.
show flow agetime
flow control (set
port)
Switch Enables or disables flow control for one or more ports. For details,
refer to Section 4.2.6.2.
set port flowcontrol port-string {disable | enable}
flow control
(show port)
Switch Displays the flow control state of one or more ports. For details,
refer to Section 4.2.6.1.
show port flowcontrol [port-string]
flow limit
(enable)
Switch Enables or disables the flow setup threshold feature on one or more
port(s), or re-enables one or more port(s) that were disabled due to
flow setup thresholding. For details, refer to Section 14.3.9.2.
set flowlimit {[system | port-string disable | enable]
[port-string operational]}
CLI Task Mode Command Function and Syntax