Specifications

General Configuration Command Set
Setting Basic Device Properties
3-44 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
3.2.2.12 set system contact
Use this command to identify a contact person for the system.
set system contact [“contact_string”]
Syntax Description
Command Defaults
If contact_string is not specified, the contact name will be set to a blank string.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set the system contact string:
contact_string (Optional) Specifies a text string that contains the name
of the person to contact for system administration. A
contact string containing a space in the text must be
enclosed in quotes as shown in the example below.
Matrix>set system contact “Joe Smith”