Specifications

CLI Tasks, Command Functions and Syntax
DoS host security (show)
A-10 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
DoS host
security (show)
Router Displays Denial of Service security status and counters. For details
refer to Section 14.3.8.1.
show HostDoS
dot1x
authentication
(clear)
Switch Resets 802.1X authentication parameters to default values on one or
more ports. For details refer to Section 14.3.2.6.
clear dot1x auth-config [authcontrolled-portcontrol]
[keytxenabled] [maxreq] [quietperiod] [reauthenabled]
[reauthperiod] [servertimeout] [supptimeout] [txperiod]
[port-string]
dot1x
authentication
(enable)
Switch Enables or disables 802.1X port-based web authentication. For
details refer to Section 14.3.2.3.
set dot1x {enable | disable}
dot1x
authentication
configuration
(set)
Switch Configures 802.1X authentication. For details refer to
Section 14.3.2.4.
set dot1x auth-config {[authcontrolled-portcontrol value]
[keytxenabled{enabled | disabled}] [maxreq value]
[quietperiod value] [reauthenabled {enabled | disabled}]
[reauthperiod value] [servertimeout timeout] [supptimeout
timeout] [txperiod value]} port-string
dot1x
authentication
configuration
(set port)
Switch Enables 802.1X reauthentication or initialization control on one or
more ports. For details refer to Section 14.3.2.5.
set dot1x port port-string [init | reauth]
dot1x
authentication
(show)
Switch Displays 802.1X status, authentication configuration information,
diagnostics, statistics, and reauthentication or initialization control
information for one or more port access entity (PAE) ports. For
details refer to Section 14.3.2.4.
show dot1x [auth-diag] [auth-session-stats] [auth-stats]
[port [init | reauth]] [port-string]
CLI Task Mode Command Function and Syntax