Specifications

CLI Tasks, Command Functions and Syntax
DoS host security (enable)
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide A-9
directory
(show)
Switch Displays CLI configuration files stored in NVRAM. For details,
refer to Section 3.2.5.1.
dir [all]
disconnect
Switch Closes an active console port or Telnet CLI session. For details,
refer to Section 11.2.2.10.
disconnect [ip_address | console]
DNS (clear)
Switch Deletes all DNS information. For details, refer to Section 11.2.3.18.
clear dns
DNS domain
(clear)
Switch Clears the DNS domain name. For details, refer to
Section 11.2.3.15.
clear dns domain
DNS domain
(set)
Switch Sets the DNS domain name. For details, refer to Section 11.2.3.14.
set dns domain domain-name
DNS server
(clear)
Switch Clears a DNS server address. For details, refer to Section 11.2.3.17.
clear dns server ip-address
DNS server (set)
Switch Adds a server to the DNS server list. For details, refer to
Section 11.2.3.16.
set dns server ip-address
DNS (show)
Switch Display DNS settings. For details, refer to Section 11.2.3.13.
show dns
DoS host
security
counters (clear)
Router Clears Denial of Service security counters. For details refer to
Section 14.3.8.3.
clear hostdos-counters
DoS host
security
(enable)
Router Enables or disables Denial of Service security features. For details
refer to Section 14.3.8.2.
HostDoS {land | fragmicmp | largeicmp size | checkspoof |
portscan}
CLI Task Mode Command Function and Syntax