Specifications

CLI Tasks, Command Functions and Syntax
Cisco DP port trust (set)
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide A-5
Cisco DP
(enable)
Switch Enables or disables Cisco Discovery Protocol on the device. For
details, refer to Section 3.2.6.5.
set ciscodp status {enable | disable}
Cisco DP
(show)
Switch Displays Cisco Discovery Protocol information. For details, refer to
Section 3.2.6.1.
show ciscodp
Cisco DP hold
time
Switch Specifies a hold time for Cisco DP packets. For details, refer to
Section 3.2.6.7.
set ciscodp holdtime time
Cisco DP
populate
Switch Populates the Enterasys (CDP) Discovery Protocol MIB with Cisco
information. For details, refer to Section 3.2.6.8.
set ciscodp populatecdp {enable | disable}
Cisco DP port
(enable)
Switch Sets the status of the Cisco Discovery Protocol on one or more
ports. For details, refer to Section 3.2.6.11.
set port ciscodp status port-string {auto | disable | enable |
passive}
Cisco DP
neighbor
(show)
Switch Displays information about neighboring Cisco devices on one or
more ports. For details, refer to Section 3.2.6.10.
show port ciscodp neighborinfo [details] [port-string]
Cisco DP port
(show)
Switch Displays summary information about Cisco Discovery Protocol for
one or more ports. For details, refer to Section 3.2.6.9.
show port ciscodp info [port-string]
Cisco DP port
CoS (set)
Switch Sets the CoS value for one or more “untrusted” Cisco DP port(s).
For details, refer to Section 3.2.6.13.
set port ciscodp cos-ext port-string classify-value
Cisco DP port
trust (set)
Switch Sets the trusted status of one or more Cisco DP port(s). For details,
refer to Section 3.2.6.12.
set port ciscodp trust-ext port-string {trusted | untrusted}
CLI Task Mode Command Function and Syntax