Specifications

CLI Tasks, Command Functions and Syntax
banner (clear)
A-4 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
banner (clear)
Switch Clears the banner message of the day displayed at session login. For
details, refer to Section 3.2.2.8.
clear banner motd
banner (set)
Switch Sets the banner message of the day displayed at session login. For
details, refer to Section 3.2.2.7.
set banner motd message
banner (show)
Switch Shows the banner message of the day displayed at session login. For
details, refer to Section 3.2.2.6.
show banner motd
baud (set
system)
Switch Sets the console port baud rate. For details, refer to
Section 3.2.2.16.
set console baud rate
broadcast (set
port)
Switch Limits (in packets per second) broadcast suppression on one or
more ports. For details, refer to Section 4.4.9.2.
set port broadcast port-string packet_count [disable | enable]
broadcast
(show port)
Switch Displays port broadcast suppression information for one or more
ports. For details, refer to Section 4.4.9.1.
show port broadcast [port-string]
CDP (set)
Switch Enables or disables the Enterasys (CDP) discovery protocol on one
or more ports. For details, refer to Section 3.2.6.2.
set cdp {auto | disable | enable} [port-string]
CDP (show)
Switch Displays the status of the Enterasys (CDP) discovery protocol and
message interval on one or more ports. For details, refer to
Section 3.2.6.1.
show cdp [port-string]
CDP interval
(set)
Switch Sets the message interval frequency of the Enterasys (CDP)
discovery protocol. For details, refer to Section 3.2.6.3.
set cdp interval frequency
CLI Task Mode Command Function and Syntax